Component Cleaning Machine

TOP LOADING ROTARY COMPONENT CLEANING MACHINE

Description :

Our Rotary table washing machines has been developed to provide fast and efficient cleaning of manufactured components. Suitable for parts with simple geometry with batch of small parts loaded on basket or individual big parts on fixtures. In Rotary Table Spray Washers Components would be loaded on Rotary basket, which is rotated by a motor and gearbox arrangement in slow speed. During the rotation, the solution (water along with alkaline) from the tank is pumped with the help of High Pressure pump to wash chamber of Top Loading spray washer  through inline filter multiple and spray nozzles located above, below, and to the sides of the rotary table to attain higher degree of cleaning results. From Rotary Table Washer Wash chamber it drains back to the tank via a basket filter. Spray pressure indicator (Glycerine filled pressure gauge) is provided to monitor the line pressure. Low water level indication and Digital temperature indicator cum controller is provided on the control panel.

The Rotary Component Washing Machine Uses  only hot water and biodegradable Alkaline detergent products – making them good for the environment and good for the operator. Our Rotary Table Component Cleaning Machine designed for fast, effective space saving and economical – high levels of cleanliness can be achieved for low cost and little effort.

Ultramax Hydrojet Rotary Basket Cleaning Machine is without doubt the best performing Rotary type component cleaning machines available on today’s market.

Process :

Ø  Working Temperature: 50 to 65 deg.

Ø  High Pressure Alkaline sprays wash.

Ø  After Spray wash Rinse.

Ø  Compressed air blowing.

Ø  Hot air blowing.

ØTimers are provided for controlling wash cycle and drain time durations.

Above process can be customized in our Top Load Parts Washer according the Process requirement of the component.

Accessories :

The Main parts of Top load cabinet industrial parts washer are

Ø  Well-designed Rotary table washing machines Wash Chamber with Mechanical Door Seal ~ No rubber seals to replace or leak!

Ø  High pressure vertical / horizontal pumps.

Ø  High pressure centrifugal blower with Electric hot heater for component drying.

Ø  Sprocket drive system (as opposed to troublesome direct drive or chain drives).

Ø  Low Water Shut-Off ~ Protect your heat elements from low water conditions

Ø  Stainless Steel V-Jet Nozzles ~ Durability and precise 360 degree cleaning coverage

Ø  Rotary Table Component Cleaning Machine is provided with PLC Controlled Industrial Control Panel

Ø  Gravity Filter to keeps tanks free of larger debris

Ø  Mist collector for Exhaust systems.

Ø  Oil Skimmer for effective removal of oil from tank.

Ø  Rotary type component cleaning machines wash tank can be also provided with Oil separator for effective removal of oil from the tank in high volume.

Ø  Washable Filtration system for reuse of aqueous solution.

Ø  A thermostat-controlled electric immersion heater in Rotary Basket Cleaning Machine maintains the aqueous cleaning solution at the desired temperature.

Ø  Rinse tank for removing alkalinity from component post spray wash in Top load cabinet industrial parts washer.

Specification & Features :

Ø  Dynamic range of basket sizes - 600mm, 720mm, 1000mm, 1500mm & 1800mm diameter.

Ø  Wash solution temp varies from 50 to 65 degree.

Ø  General spray Pump pressure from 3 to 25 bar according component cleanliness level requirement. On request can supply up to 150 bar.

Ø  Single Tank capacity from 110 litre to 400 litre.

Ø  Two tank concepts for offline filter concept can also be provided in Rotary Table Component Cleaning Machine for high Millipore value requirement.

Ø  Our Machine performance, Reliability  & quality superior than component cleaning machine manufacturers in pune

Ø  Filtration range of 150 micron to 5 micron filtration can be provided with online & offline filtration.

The Rotary table type component cleaning machine available as standard but also customized for better cleaning quality benefits, handling and productivity by our technical experts & design team

Custom systems can be designed with a Rotary table as large as needed and weight capacities to match.

Application :

·         Suitable for general cleaning of different components cleaning in the same machine. Supports cleaning of wide variety of components.

·         Intermediate or final cleaning in the automatic parts washer.

·         General Engineering washing by Rotary Table Type Component Cleaning Machines

·         OEM’s

·         Aerospace

·         Manufacturing

·         Railway Degreasing.

·         Automobile component washing machine

·         Hydraulics industry – Cylinder washing machine.

·         Metal Pressing Industry – pressed component washing machine

·         Metal Casting Industry

·         Printing Industry.

·         Crankshaft Washing Machine.

 

Contact Us

ULTRAMAX HYDROJET PVT LTD

Plot No.AC-31/4-A 6th Main Road,

SIDCO Industrial Estate,

Thirumudivakkam, Chennai - 600 044,

Tamilnadu,India

Ph: +91-9444575000